index_title=PPP Dialin Server
index_enopfile=The PPP passwords file '$1' does not exist on your system. Maybe PPP is not installed
index_table=PPP Dial-in and Dial-out Accounts
index_user=Username
index_server=Server
index_uany=ANY
index_sany=ANY
index_create=Create new PPP account.
index_info=Webmin can be configured so that changes to the Unix user list will automatically be applied to the list of PPP accounts. This will only work when the <tt>Users and Groups</tt> Webmin module is used to add, delete or change users.
index_onadd=Add a PPP account when a Unix user is added, for the server
index_onchange=Change the PPP account when a Unix user is changed
index_ondelete=Delete the PPP account when a Unix user is deleted
index_apply=Apply
index_return=PPP index
index_none=You do not have access to any of the features of this module.
index_delete=Delete Selected Accounts

secrets_title=PPP Accounts
secrets_return=index
secrets_none=No PPP accounts have been created yet.
secrets_ecannot=You are not allowed to edit PPP accounts

edit_secret_etitle=Edit PPP Account
edit_secret_ctitle=Create PPP Account
edit_secret_acc=PPP Account
edit_secret_user=Username
edit_secret_serv=Server
edit_secret_sany=Any
edit_secret_uany=Any
edit_secret_pass=Password
edit_secret_none=None
edit_secret_ffile=From file
edit_secret_leave=Leave unchanged
edit_secret_setto=Set to
edit_secret_vaddr=Valid Addresses
edit_secret_aany=Allow any
edit_secret_anone=Allow none
edit_secret_alist=Allow listed..
edit_secret_save=Save
edit_secret_del=Delete
edit_secret_return=account list

save_secret_esave=Failed to save account
save_secret_enoip='$1' is not a valid address

log_create=Created PPP account $1
log_modify=Modified PPP account $1
log_delete=Deleted PPP account $1
log_deletes=Deleted $1 PPP accounts
log_sync=Changed unix user synchronisation
log_apply=Applied Mgetty configuration
log_options=Saved PPP options
log_options2=Saved PPP options for $1
log_dialin_create=Created caller ID number $1
log_dialin_modify=Modified caller ID number $1
log_dialin_delete=Delete caller ID number $1
log_dialin_move=Moved caller ID number $1
log_mgetty_create=Created serial port $1
log_mgetty_modify=Modified serial port $1
log_mgetty_delete=Deleted serial port $1

options_title=PPP Options
options_serial=For serial port $1
options_dev=For device $1
options_ecmd=The PPP server command $1 was not found on your system. Maybe it is not currently installed.
options_epppd=The PPP server $1 installed on your system does not appear to be the Linux PPP daemon supported by this module.
options_elogin=The Mgetty login options file $1 was not found on your system. Maybe Mgetty is not installed, or your <a href='$2'>module configuration</a> is incorrect.
options_desc=The options below will apply to all PPP connections received by your server, on all serial ports. They will override any port-specific options set from the Serial Port Configuration page.
options_header=PPP server options
options_autoppp=Automatically detect PPP connections on serial ports? (Recommended)
options_ip=PPP IP addresses
options_auto=From client
options_local=Local IP
options_remote=Remote IP
options_netmask=PPP interface netmask
options_proxyarp=Create proxy ARP entry?
options_auth=Require authentication?
options_auth0=No, but prevent routed IPs
options_auth1=Never
options_auth2=Always
options_lock=Lock serial port?
options_ctrl=Control lines mode
options_ctrl0=Local
options_ctrl1=Modem
options_dns=DNS servers for clients
options_edns='$1' is not a valid DNS server IP address
options_login=Also do unix authentication?
options_idle=Idle time before disconnect
options_idle_def=Never
options_eidle=Missing or invalid idle time
options_ecannot=You are not allowed to edit PPP options

mgetty_title=Serial Port Configuration
mgetty_ecmd=The command $1 was not found on your system. This program is needed to handle serial port logins via modem or direct connection.
mgetty_desc=For your server to allow logins on a serial port via modem or a direct connection, it must be listed below. When you add a port to this list, the $1 program will be configured to answer modem connections and display a login prompt.
mgetty_add=Add a new serial port.
mgetty_tty=Serial device
mgetty_vgetty=Voicemail
mgetty_speed=Port speed
mgetty_auto=Automatic
mgetty_type=Type
mgetty_direct=Direct connection
mgetty_modem=Modem
mgetty_answer=Answer after
mgetty_config=Port PPP config
mgetty_cedit=Edit..
mgetty_rings=ring(s)
mgetty_none=No serial ports have been configured for dial-in access yet.
mgetty_create=Add Serial Port
mgetty_edit=Edit Serial Port
mgetty_ts=Serial port $1
mgetty_other=Other device..
mgetty_baud=baud
mgetty_header=Serial port configuration options
mgetty_return=serial port list
mgetty_back=Answer ringback within
mgetty_back_def=Ringback disabled
mgetty_secs=secs
mgetty_prompt=Login prompt
mgetty_mode=Modem mode
mgetty_df=Data or fax
mgetty_d=Data only
mgetty_f=Fax only
mgetty_err=Failed to save serial port
mgetty_etty=Missing or non-existant serial device
mgetty_espeed=Missing or invalid speed
mgetty_eanswer=Missing or invalid number of rings
mgetty_eback=Missing or invalid number of ringback seconds
mgetty_eclash=The serial port $1 is already in use
mgetty_apply=Apply Configuration
mgetty_applydesc=Click this button to apply the current serial port configuration by running the command $1 and killing all Mgetty processes.
mgetty_applyerr=Failed to apply configuration
mgetty_ecannot=You are not allowed to edit serial port configurations

dialin_title=Caller ID Access
dialin_desc=This page allows you to configure Mgetty to allow or deny dialin access based on the phone number of a caller. When a call comes in, the first entry in the list that matches the phone number will determine whether the call is accepted or not.
dialin_efile=The Mgetty caller ID access control file $1 was not found on your system. Maybe Mgetty is not installed, or your <a href='$2'>module configuration</a> is incorrect.
dialin_add=Add a new caller ID number.
dialin_number=Phone number
dialin_ad=Action
dialin_allow=Allow
dialin_deny=Deny
dialin_nonumbers=No caller ID numbers have been configured yet. All calls will be accepted.
dialin_all=All numbers
dialin_none=Unknown numbers
dialin_match=Numbers starting with
dialin_return=caller ID list
dialin_edit=Edit Caller ID Number
dialin_create=Create Caller ID Number
dialin_header=Caller ID number details
dialin_move=Move
dialin_err=Failed to save caller ID number
dialin_enumber=Missing or invalid phone number
dialin_ecannot=You are not allowed to edit caller ID access

acl_pages=Available pages
acl_direct=Go direct to one page?

sync_ecannot=You are not allowed to edit unix-ppp synchronization options
sync_title=User Synchronization

delete_err=Failed to delete accounts
delete_enone=None selected

__norefs=1
